-
U30 Analog Inputs
This information is included in the U30 manual. See attachment. Includes hardware
-
Safety Data Sheet for Replacement Rechargeable Battery Pack (HRB-NIMH-6)
Please see attached Safety Data Sheet for Replacement Rechargeable Battery Pack for RX2102, RX2104 and RX2106 (Part #HRB-NIMH-6).
-
Optic logger communication problems
All Users: HOBO Optic data loggers must be inserted into the Base Station (or Shuttle) using the appropriate coupler for that logger in order for the computer to detect them. Note: HOBOwa
-
Wiring Diagram - Monitoring DC Voltage and Current with the RX3000 Station
Attached is a drawing that shows how to monitor DC voltage and/or current using the RX3000 Remote Monitoring Station via the Four Channel Analog Input Module, RXMOD-A1. For DC current monitoring, the...
-
Installing the mounting kit on the HOBO RX3000 station
See how to install the tripod mounting kit in this short video.
-
-
Rain Gauge Field Calibration Kit
The manufacturer of Onset rain buckets, Texas Electronics, offers a calibration kit that makes it easy to calibrate your rain gauges in the field. (Onset uses the TE-525 series bucket for our RG3,...
-
Required Tools for Weather Station Setup
Required tools for weather station setup: 1/2” wrench or socket for tripod and u-bolts note that RX cellular antenna and channel kits have limited access when using a socket 5/16”...
-
MX logger is listed in the wrong group. How can I change that?
Connect to the logger, tap Configure, and then tap Group. Select a group for the logger or create a new group. If you do not want the logger to be listed in any group, then remove it from all...
-
Unmap DTF files in Hoboware
Often this issue manifests itself when both Hoboware and BoxCar are installed on the same computer. To correct the issue, simply unmap DTF file in Hoboware. (If you use a weather station, energy...
-
Soil Monitoring Station with the HOBO Micro Station (H21-002)
This technical note provides a solution for monitoring soil temperature and moisture with the HOBO Micro Station (H21-002). This soil monitoring station provides an easy and cost-effective solution...
-
Wiring Diagram - Monitoring 24VAC On/Off with an RX3000 Station
Attached is a wiring diagram that shows you how to monitor the on/off state of a 24VAC circuit using the RX3000 station. In addition to the RX3000 and the RXMOD-A1 Four-Channel Analog Input module,...