Waterproof shuttle firmware update

Follow this link to a helpful video if you need to update your waterproof shuttle firmware. http://www.youtube.com/watch?v=8_O9-x7CPt8

Sample Data - Plug Load Data and Power Loss

Attached is a screenshot of a data file from a HOBO UX120-018 Plug Load Logger that shows you what happens if AC power is lost during deployment. Because the logger operates on battery power when AC...

Monitoring Flow With Water Level Loggers: A Best Practices Guide

One of the challenges facing irrigation organizations and individual farms is the accurate monitoring and recording of irrigation water usage in open channel applications. This guide explains how to...

Facility Manager’s Guide to Data Logging

The energy required to operate buildings in the United States is the largest sector of energy use, representing about 40% of U.S. energy demand. Measuring building performance can help facility staff...

Using the pHionics STs pH Sensor with a HOBO RX3000 Station

This application note describes how to connect, calibrate, and operate the pHionics STs pH sensor with the HOBO RX3000 station. The pH sensor is compatible with any RX3000 configuration (cellular,...

Working with HOBO Data Loggers for Energy Monitoring

This course makes the participant familiar with the various Onset products that are available for monitoring electrical energy. It includes discussions of various measurement techniques, logger...

Part 5 - Planning your HOBO Weather Station Installation

Part 5 in a series of 7

T-VER-E50B2 operation

The T-VER-E50B2 Energy and Power Meter outputs three sets of pulses that are logged by the UX120-017. These pulses represent Watt-hours, Amp-hours, and VAR-hours. HOBOware software uses these pulse...

Calibrating for pH at Temperatures Other than 25°C

The observed pH of the buffers (and samples) varies depending on temperature. As a result, it’s important to use pH calibration buffers that have known values at different temperatures (like the...

Wiring Diagram - How to Connect Multiple Sensors to One AC-SENS-1 Power Supply

Attached is a drawing that shows you how to power multiple external sensors with (1) AC-SENS-1 Power Supply. Please note that the AC-SENS-1 can supply 12VDC to a maximum load of 400mA. Helpful...

Water Temperature Monitoring in Buzzards Bay Watershed

Learn how underwater temperature data loggers are being deployed to gather critical information for the Coalition for Buzzards Bay water monitoring program.

Part 3 - Planning your HOBO Weather Station Installation

Part 3 in a series of 7