-
-
How to Analyze Data in HOBOware - Statistics and Filters
Learn how HOBOware displays statistical and filtered data in the same data file.
-
How HOBOlink and the HOBO RX3000 handle Standard Time and Daylight Saving Time changes
The HOBO RX3000 knows nothing of Standard Time (ST) or Daylight Saving Time (DST). Data is always logged at UTC (Coordinated Universal Time) and the appropriate offset is calculated per your settings...
-
Cell constant note
Because the U24 data logger uses a noncontact AC conductivity measurement system, the cell constant varies over the measurement range. This is why we calibrate each logger and generate the...
-
Using HOBO U24-002-C Data with the U26-001 and the DO Assistant
Will the HOBO U24-002-C be good enough for salinity-adjusted dissolved oxygen? See the attached pdf, which includes a graph that plots the effect of U24-002-C error on DO measurements
-
Statistical Logging and Battery Life
You can configure HOBO UX100 series and some HOBO UX120 series loggers to calculate maximum, minimum, average, and standard deviation statistics for all enabled sensors dur
-
I changed the units in Settings. Why is the logger still displaying the old units?
The units displayed on the logger LCD can only be changed if the logger is reconfigured. To change the units on the logger LCD, select the desired units in Settings, connect to the logger, tap...
-
Sample Data - Energy Consumption, Indoor & Outdoor Temperature - HOBO H22-001 Energy Logger
Attached is a screenshot from our HOBOware Pro software that depicts data recorded by the HOBO H22-001 Energy Logger over a 24-hour period, in a residence. The measured parameters include indoor and...
-
Launch Basics in HOBOware
Learn the basics of the HOBOware Launch window. Note that most of these features are common for all HOBO loggers that are compatible with HOBOware software. For additional training materials,...
-
-
HOBOware Pro's kWh Assistant
Learn how to use the kWh Assistant to scale pulses from kWh Transducers into kW and kWh
-
Using specific conductance to calibrate data
It is okay to use specific conductance at 25C as calibration points. To calculate specific conductance at 25C from conductivity and temperature, use the attached spreadsheet. The thermal factor of 2...