How To Add the HOBOnet Manager to a HOBO RX3000 Station

Please click one of the links below for help adding a HOBOnet Manager to a HOBO RX3000 station. On YouTube https://www.youtube...

Concrete Temperature Monitoring with Data Loggers

Learn the importance of monitoring concrete-curing temperatures and the potential consequences of not doing so. Presenters from Hoskin Scientific and Davroc & Associates share how they used low-cost...

Water Level Quick Test

Please see attached document

Judd Communications Snow Depth Sensor with the U30 Remote Monitoring Station

Check out the attached PDF to find out how to use the Judd Communications Snow-Depth Sensor with the HOBO® U30 Station.

HOBO U20L Water Level Data Logger

View an introduction to the HOBO U20L low-cost, research-grade water level loggers setting the standard for price/performance for high-accuracy water level and temperature monitoring.

Wiring Diagram - HOBO RX3000 - Wiring Analog Sensors to the RXMOD-A1 Module

Attached is a diagram that shows how to connect sensors to the optional 4-channel RXMOD-A1 analog input module.

Part 7 - Planning your HOBO Weather Station Installation

Part 7 in a series of 7

Waterproof shuttle for beginners

These photos illustrate how to use the Waterproof Shuttle and a data logger together. We are showing a Water Temp Pro v2 - U22-001 logger for this demonstration, but the same steps apply to any...

How to configure differential pressure for bidirectional scaling

Set the PXU sensor to Bidirectional mode by moving the jumper to BI, as described in the attached manual. Once the jumper is set to Bidirectional you will need to launch the logger choosing the...

Web-based system monitors power for Energy Utility

Alec Stevens of the Wellesley, Massachusetts energy consultancy DMI is using every port on Onset's U30 in a year-long project in an apartment complex. The task: monitoring a newly installed combined...

Connecting a Thermocouple to an RX3000 Station

In order to connect a thermocouple to an RX3000 station, you will need to use a third-party thermocouple transmitter, like the Omega TX13 series, which is available directly from Omega, click here...

Telaire 7001 Manufacturers Manual

Attached please find the manufacturer's manual that is shipped with each Telaire 7001 CO2 Sensor